How to Make Electrode Pads Sricky Again
How to Ready TENS Pads That Won't Stick
If y'all accept been using tens units for some time, y'all may have noticed that TENS electrode pads lose their stickiness overtime. In this article, we discuss how to brand agglutinative pasty again and extend the life of tens unit of measurement pads that are not viscous anymore.
TENS units help people who are suffering pain from outstanding injuries or other factors over the long-term. If you're wondering how a TENS machine works, check out our other article that describes it in item. It y'all're wondering "what is TENS therapy?" then go hither to review.
Using a TENS Unit
TENS machines are designed to be used over the long-term. To use one,
- You should clean your peel with rubbing alcohol and apply gel to each electrode.
- Identify them on your skin, and then hold them in place with the TENS pads.
- Make clean the pads with a moistened material.
- Add a few droplets of h2o on the gel cover.
- Brush the gel surface lightly in one way.
- Alternate the electrodes every four to half-dozen hours.
- Let them dry out in a cool atmosphere for 24 hours.
- Use Electrode Gels
-
Clean them with a moist cloth
-
Add a few drops of h2o on the gel surface
-
Castor the gel surface gently in one direction
-
Rotate the electrodes every 4 to six hours
-
Let them dry in a cool environment for 24 hours
-
Keep your pads sticky for longer
-
Increase the electrical conductivity of the pads
The issue is, these TENS electrode pads somewhen get un-sticky, and so the question that this article will answer is how do yous make them sticky again?
| Make Tens Unit Pads Viscid Once more | ||
|---|---|---|
| If | What to Do | |
| Electrode pads are less sticky | | |
| Oversaturated | | |
| Above methods don't work | | |
How to Clean TENS Unit of measurement Pads
Every TENS device crave electrode pads and then y'all can stick the electrodes to your skin. These pads can sometimes get dirty and become hard to stick.
Clean Your Skin Properly
This tin can happen for many reasons, but most normally information technology's due to not cleaning your skin properly earlier applying the pads every bit the debris on your skin and your body'south natural oils tin can accept away from the pads stickiness.
Clean your skin with soap and water
To clean your TENS unit pads, utilise a damp cloth. Do not utilize a paper towel, napkin, or annihilation else that can become stuck or tear.
Gently wipe away the debris on the pad, and brand certain to e'er thoroughly clean your peel before applying the TENS unit to your skin.
Clean or Supersede Information technology
Before every use, check to make sure at that place is some stickiness (tac) to each gel pad. If at that place's no grip any, you should clean information technology or replace it.
Self-adhering electrodes demand to be hydrated, only don't make the mistake of holding them under h2o. Submerging your electrodes volition cause oversaturation. All you need to do is put a drop of water on to the electrode, it may be easiest to use a dropper to practice so.
You may want to clean your pads using a clean tooth brush. Brush it in one direction; this will "fluff" it a bit and expose more than of the stickiness.
To avoid oversaturation, make sure to always rotate your electrodes. Y'all should always let your electrodes to dry by removing them at least every six hours and allowing them to dry in a cool surround.
Permit the gel exist exposed to the cool, dry out air for at least a full day before reusing it.
As long as you lot have a frost-free fridge, y'all can store the electrodes in at that place. The lack of humidity and the coolness volition work together to remove backlog water and prevent over-saturation.
You should likewise realize that sometimes, TENS pads just have their adhesive dry out. This is expected over time and requires you to replace the pads, as cleaning them will practice little good.
TENS pads can likewise be over-saturated due to sweating or high humidity. To avoid over saturation (likewise much water), switch your electrodes every four hours or so, and never take your TENS machine exterior in the pelting or near water.
Electrode Gels For Tens Units
The gel is applied to the electrode pads and it helps them in conducting pulse to the peel. Many users report that they extend the life of old pads past using mucilaginous gel for electrode gels.
The electrode gel may aid the pads terminal longer only keep in mind it is non a replacement of getting new pads.
TENS Unit Replacement Pads
It may exist necessary to supersede your TENS unit electrode pads if they no longer stick to your skin. TENS pads do need to be replaced most every i to 3 months depending on how many times y'all have off and re-apply your TENS pads.
To extend the life of your TENS pads, wipe them off gently subsequently every employ with moist toilettes. Make sure you don't get your TENS pads moisture and you keep them in a dry out place.
Buying Quality Electrode Pads
When information technology does come up time to replace your TENS pads, look for a good quality pad. Cheaper ones won't stick as well and will need to be replaced much more ofttimes (some every two to iii weeks) than more expensive pads.
How Long Should TENS Pads Last?
Pads should be replaced at to the lowest degree every 30 uses, but by having a higher quality pad you'll get a longer lifespan out of it and will besides feel amend results.
You can purchase TENS unit pads locally, or shop online from stores like amazon, walmart, walgreens
To save coin, you may consider buying your TENS unit of measurement pads in bulk. They come in sets of twelve and twenty.
Extra Sticky Pads
Typically a pack of xx costs about $60, which is just around $five a pad. College quality pads will stick longer and hold upward for more uses, simply they volition also be more expensive.
Eco-Patch
Premium Electrodes
10 Packs - 40 Electrodes
How to Accept Care of Tens Electrodes
Pick the TENS Units you want to evaluate and compare specs, ratings, prices
Source: https://tensunithub.com/make-tens-unit-pads-sticky-again/
0 Response to "How to Make Electrode Pads Sricky Again"
Post a Comment